McMahon & Mann Consulting Engineering and Geology, P.C.

Lewiston Queenston Bridge Noise Barrier Wall

Share |


Lewiston Queenston Bridge Noise Barrier Wall
Project Details
Location: Lewiston, New York
Client: Oakgrove Construction, Inc.
Client Contact: Mr. Kenneth Rawe, P.E. 716-652-2200

Oakgrove Construction, Inc. Corporation (Oakgrove) was engaged to rehabilitate the Lewiston-Queenston Bridge and part of its contract required the design and installation of a sound barrier along the approach to the bridge on the U.S. side. Oakgrove engaged MMCE to design the sound barrier foundations.                     

MMCE engaged a test boring firm to drill borings along the alignment of the sound wall. The borings revealed that the bridge approach had been built on rubble fill covering bedrock.

MMCE designed the sound barrier with concrete posts and panels. The foundations are drilled shafts extending into the rubble fill. MMCE used the computer program LPILE to estimate lateral deflections of the foundations.

The 704-foot long wall ranges from 12.5 to 14.5 feet high. 





Related Documents

Lewiston Queenston Bridge Noise Barrier Wall Project Description - This document contains information on this project


© 2018 McMahon & Mann Consulting Engineering and Geology, P.C. All Rights Reserved.